Email Us
Electronics Manufacturing & Assembly
GreensTone specializes in contract manufacturing of printed circuit board assemblies (PCBAs), subsystem integration and full-box builds.

Electronics Manufacturing Services in China

GreensTone provides electronics manufacturing services (EMS) in China, covering material procurement, PCBA, wire harnesses, enclosures, complete product assembly, testing and packaging. PCBA production is carried out through our manufacturing partner, while wire harness assembly, enclosure assembly and final product assembly are completed at our own factory. We support OEM projects with production introduction, engineering change management and after-sales service. From the initial manufacturing review to finished product delivery, we coordinate the electronic and mechanical work around your product specifications and acceptance requirements.
Electronics Manufacturing & Assembly Service

EMS  “electronics manufacturing services” is commonly used interchangeably with the more general phrase “contract manufacturing (CM)”. In short, EMS companies provide a wide range of value-added design and production outsourcing services and assembly services.

We offer value-added services from early-stage engineering support to manufacturing testing, design for excellence and sustaining engineering for the full product life-cycle. Our electronics manufacturing services (EMS) support china electronic contract manufacturing projects across almost the entire product cycle, from electronic design support and prototyping to PCB assembly, cable and harness assembly, full system integration, product programming and testing, as well as supply-chain management.

Types of Electronics Manufacturing & assembly Service

GreensTone specializes in Circuit board assembly,Complex secondary operations, Electromechanical, Testing ,Sheet metal chassis and plastic injection for full box build applications, Sub-assembly and Wire harnesses. Count on GreensTone to help you thoroughly analyze your design, materials, supply chain and processes to manufacture complex products on time and within budget. Our manufacturing readiness specialists can help you optimize bills of materials (BOMs), reduce transfer and production costs, and utilize advanced testing to verify that your products are built to strict OEM and regulatory requirements.
GreensTone offer a full spectrum of services that extend from early product design through prototyping, ramp-to-production, mass production and follow-up for complete product life-cycle management. We offer value-added services from early-stage engineering support to manufacturing testing, design for excellence and sustaining engineering for the full product life-cycle. GreensTone conducts upfront evaluations of all components, designs and fabrication processes to optimize suppliers and technologies. We recommend appropriate alternatives to minimize risks and reduce costs
We specialize in contract manufacturing of printed circuit board assemblies (PCBAs), subsystem integration and full-box builds (high-level assemblies). Count on GreensTone for on-time delivery that enables you to meet project timelines. Our contract manufacturing also will optimize bills of materials (BOMs), reduce transfer and production costs, and utilize advanced testing to verify that your products are built to strict OEM requirements.
GreensTone offer value-added services from early-stage engineering support to manufacturing testing, design for excellence and sustaining engineering for the full product lifecycle.
Products

Electronics Manufacturing Service in Greenstone

GreensTone specializes in the following assemblies:

  • Circuit board assembly, including:

  • Surface mount technologies (SMT)

  • Pin Through Hole

  • Complex secondary operations

  • Automated conformal coating

  • Inspection

  • Automated optical inspection (AOI)

  • Electromechanical

  • Plastic injection molding

  • CNC machining

  • Sheet metal fabrication

  • Testing

  • Flying probe

  • In-circuit (ICT)

  • Functional

  • ESS

  • Programming

  • Sheet metal chassis and plastic cases for full box build applications

  • Sub-assembly

  • Wire harnesses


Electronics Manufacturing Service in Greenstone

One-Stop Electronics Manufacturing Services for OEM Products

Our one-stop electronics manufacturing services bring procurement, electronic assembly and mechanical integration into one coordinated project. You can specify the required manufacturing stages and the form in which the product should be delivered.


ServiceWhat We Can ProvideHow the Work Is Handled
Material and component procurementProcurement against the customer’s BOM, including arrangements for customer-supplied parts.Managed by GreensTone.
PCBA productionSMT, through-hole and mixed-technology assembly, with inspection and testing requirements defined for the project.Completed through our manufacturing partner.
Wire harness assemblyAssembly and installation of wires, cables and connectors according to product requirements.Completed at our own factory.
Enclosure tooling and assemblyEnclosure tooling and assembly based on customer drawings and agreed product specifications.Handled by our own factory according to the project scope.
Complete product assemblyIntegration of PCBA, wiring, enclosures and mechanical parts into the finished product.Completed at our own factory.
Programming and product testingCustomer-provided firmware programming and finished product testing against agreed instructions.Completed at our own factory as specified for the project.
Packaging and shipment preparationCustom outer packaging design, labeling, packing and preparation for delivery.Arranged by GreensTone according to customer requirements.


For board-level manufacturing, our PCB assembly services cover the assembly, sourcing and inspection requirements of the circuit board. For complete electronic products, our box build assembly services extend the scope to wiring, enclosure integration, product testing and packaging.

This production model gives OEM buyers a clear view of which operations are completed by our manufacturing partner and which are completed at GreensTone’s own factory.


Electronics Manufacturing Case: Swimming Pool Chlorinator

A swimming pool chlorinator project demonstrates how GreensTone coordinates electronic manufacturing and complete product assembly. The project combined design support, PCB manufacturing, component sourcing, SMT mounting, PCB assembly, programming, inspection and box build assembly.


Project ItemManufacturing Scope
ProductSwimming pool chlorinator.
Electronic manufacturingPCB manufacturing, component sourcing, SMT mounting, PCB assembly and programming.
Mechanical and product integrationMolding, plastic injection and box build assembly within the project scope.
Production arrangementPCBA and SMT production through our manufacturing partner; final product assembly at GreensTone’s own factory.
Project production quantityOver 100,000 pieces.


The project connects the circuit board, enclosure and complete product stages within one manufacturing program. Explore our salt water chlorinator manufacturing case for more information.

Why Choose Us As Your EMS Partner

Why Choose Us As Your EMS Partner

+5000 M2 Workshop

+12 year EMS experience

+ 20% R&D engineering

ISO 9001& ISO14001

Listed in China Hi- Tech companies

Coordinated PCBA and Final Assembly

We coordinate PCBA production through our manufacturing partner and complete wire harness assembly, enclosure assembly and final product assembly at our own factory. This allows you to define board-level and complete-product requirements within one manufacturing project.


Customer-Approved Component Changes

Component substitutions require your email confirmation and an internal ECR/ECN review before replacement. We work from your BOM and the agreed sourcing arrangement, including any customer-supplied parts.


Testing Against Agreed Requirements

Testing follows your product specifications and agreed acceptance criteria. For finished-product orders, 100% functional testing and appearance inspection can be included in the quality plan, with additional reliability tests selected for the application.


Production Introduction and Repair Support

We support production introduction by reviewing materials, assembly requirements, programming and testing instructions. All orders include a one-year repair warranty, with after-sales support available for delivered products.


Our Electronics Manufacturing Project Workflow

Our Electronics Manufacturing Project Workflow

An EMS project starts with a review of the manufacturing scope and progresses through material preparation, assembly, testing and delivery. The sequence and acceptance requirements are defined around the product’s design and intended use.

1. Project Review and Scope Definition

We review the product BOM, PCB files, mechanical drawings, wiring requirements, firmware and testing instructions. This establishes the required manufacturing stages, customer-supplied items and expected delivery scope.

2. Material Procurement and Production Preparation

Components and other materials are prepared according to the agreed BOM and supply arrangement. PCBA production is coordinated with our manufacturing partner, while harnesses, enclosures and mechanical parts are prepared for product integration.

3. Product Assembly and Programming

At our own factory, we integrate the circuit boards, wiring, enclosure and mechanical parts. Customer-provided firmware is programmed where required, with assembly work following the product drawings and agreed requirements.

4. Inspection and Product Testing

The assembled product undergoes the defined functional and appearance checks. Aging, reliability testing, barcode or serial-number identification and other specified requirements are included according to the project’s quality plan.

5. Packaging and Delivery

Finished products are labeled and packed according to customer instructions. Custom outer packaging design and shipment preparation can be included in the agreed manufacturing scope.


EMS Production Introduction, Change Management and Repair Support

Our EMS support includes production introduction, engineering change management and a one-year repair warranty for all orders. These services help connect the initial manufacturing build with subsequent production and after-sales requirements.

Production Introduction

We provide production introduction support to review the materials, assembly requirements, programming and test instructions needed for the build. Share your trial order quantity, expected production demand and available technical files so the manufacturing scope can be assessed.

Engineering Change Management

Product changes are reviewed through our engineering change process. If a component is unavailable or an alternative is proposed, we obtain the customer’s confirmation by email and complete internal engineering change request and engineering change notice review before making the substitution.

One-Year Repair Warranty

All orders include a one-year repair warranty. GreensTone also provides after-sales support for delivered products. Product identification and a description of the issue help our team review the case and arrange the appropriate repair support.


Electronics Manufacturing Services FAQs

Q
Can you supply a complete electronic product rather than PCB assemblies only?
A

Yes. Our EMS scope can include material procurement, PCBA, wire harnesses, enclosures, programming, complete product assembly, testing and packaging. The required delivery scope is agreed for the project.

Q
Which manufacturing operations are completed at your own factory?
A

Wire harness assembly, enclosure assembly, complete product assembly and finished product testing are completed at our own factory. PCBA and SMT production are completed through our manufacturing partner.

Q
Can we supply selected components or parts?
A

Yes. Identify customer-supplied items in the BOM and project documentation. GreensTone can procure the remaining specified materials according to the agreed sourcing arrangement.

Q
What tests can you provide before shipment?
A

We can provide functional and appearance inspection, with aging and additional reliability tests selected for the product. Test instructions, conditions, coverage and acceptance criteria are agreed during project review.

Q
What are the MOQ and lead time for an EMS project?
A

MOQ and lead time depend on the product design, tooling, material availability, order quantity and testing requirements. Share your BOM, drawings and expected quantities for an assessment.

Q
How do you handle component changes and after-sales support?
A

Component substitutions require customer confirmation by email and internal ECR/ECN review before replacement. All orders include a one-year repair warranty, with after-sales support provided by GreensTone.

Get in Touch With GreensTone
Start your contract manufacturing journey with GreensTone today. Simply fill out your details and we'll get in touch with you to discuss your manufacturing needs.
Contact Us
0086-755-23215983-2006
4F B5 XuJingChang Industry Zone HaoYe Rd. No.39, XinHe Street, FuYong District, Shenzhen, China